please wait
this could take several minutes
Expert Setup
Add additional Ultrafeeder arguments
There are very few circumstances where this is something you want to manually add. One might be a situation where you want to feed an aggregator that uses the 'standard' format of all the account-less aggregators, but that isn't supported out of the box. Add the configuration that you need here - it will be appended to the Ultrafeeder config.
Submit
Add environment variables to containers
The various Docker containers support a lot more environment variables than are exposed here in the UI. If there are settings that you need to add, this is the best place to do it. Please only use this if you understand what you are doing. It's reasonably simple to break your setup by inserting things here that cause the container not to start.
Please enter them one per line, with an equals sign separating the variable name from its value. The name spaces for the different containers are distinct, so for simplicity they are all just added here together.
Submit
Add arguments to map URLs
tar1090, the software used to create the map display used here, contains a plethora of URL
query parameters
. If you have preferred query parameters that you always want to use, you can add them here.
Submit
DHT22 temperature sensor
This is certainly a more advanced feature, but if you have a DHT22 temperature sensor and connect it to PINs 1 (Vcc), 7 (Data) and 9 (Ground), you can enable it here.
Enable DHT22
Don't show config link on map page
If you want to share ONLY the map / statistics with others, but don't want to show them the link to the adsb.im feeder image home page (which allows them to change the configuration), you can disable it here. Please note that the user still can simply access that page by changing the port that they access your feeder on from 8080 to 80, unless you filter this out through some firewall settings (which isn't something this image supports).
Update Settings
CSS Theme
Light Theme
Dark Theme
Auto
Submit
Docker pull: Disable concurrent downloads
Disabling concurrent downloads can be helpful on slow connections to avoid update failures or improve update speed slightly.
Disable concurrency
Enable non-ADS-B containers
In addition to tracking ADS-B data, it is possible to enable a number of others SDR-based tracking containers in this image. The SDRs can be assigned on the
SDR Setup page
once the protocols are enabled here. Similarly, data sharing can be configured on the main
Data Sharing page
.
The feed IDs below are typically in the form of
FL-ICAO-ACARSn
where
FL
are your initials (two or three letters),
ICAO
is the closest airport,
ACARS
should be the respective protocol (ACARS, VDL, HFDL) and
n
is a number to distinguish your feeds if necessary.
Enable first analog ACARS decoder
Enable
Enable second analog ACARS decoder (to allow covering the rarely used frequencies below 130MHz - which is rarely useful outside of the US)
Enable
Enable VDL Mode 2 decoder
Enable
Enable HFDL support
Enable
Enable hfdlobserver
(this requires a web-888 SDR on your network)
Enable
Enable acars2pos
(showing ACARS/VDL2/HFDL positions on the ADS-B live map)
Enable
Enable AIS / Shipfeeder
Enable
Show ships on the ADS-B live map
Enable
Enable Radio Sonde
Enable